Fastening
Fasten to the ceiling using self-tapping screws or anchors through mounting angle brackets. Fixing spacing must not exceed 1 m on both straight and curved sections.
On curved sections, seal profile cuts with metallized tape to eliminate gaps.
Jointing
Create joints without transitions or visible gaps using a 3 mm rod and a 15 mm connecting band.
Membrane cutting
If straight internal corners are present, adjust the membrane cut accordingly.
Ceiling membrane insertion
Insert the upper-level membrane using a standard straight spatula. Insert the lower-level membrane using a spatula with a working edge at least 35 mm long and angled at 70 to 90 degrees.
